Sunday, March 14, 2010

Airskates move heavy loads - no floor damage

Installation Service uses a range of airskates to accommodate loads up to 40 tonnes and with these size of loads the typical floor loading when moving on airskates is less than 30 lb/in2.
Due to the improvement in todays flooring standards, the movement of heavy machinery without causing damage to floors, is becoming increasingly difficult.
Airgonomics, specialists in airfilm equipment, are pleased to announce the launch of their Installation Service, utilising their own range of airskates.
Standard airskates in the range can accommodate loads up to 40 tonnes.
Even with these size of loads the typical floor loading when moving on airskates is less than 30 lb/in2.
We also provide an airskate hire service for anyone wishing to carry out movement of machinery.
Airskates can even be used in clean room environments where cleanliness is paramount.
Airskates operate on a thin film of air, which means when 'floating' no part of the skate is actually touching the floor, so allowing for smooth movement.
With this near friction-free movement, loads on a smooth flat floor only require 1kg of force to move a 1000kg load.
Even out of balance loads cause no problems for airskates as each skate is independently adjustable for loads.
Airskates can simply be connected to a suitable factory air line to carry out moves, or for installations and moves in new buildings, where there is no air supply, a standard road side compressor can be used.
Over many years Airgonomics have been at the forefront of airfilm technology.
If you have any requirements or require any further information regarding airskates, or airfilm equipment then do not hesitate to contact us.
http://www.manufacturingtalk.com/news/aig/aig100.html

Increase Expected in Heavy Equipment Sales in China

Komatsu, the Japanese heavy equipment maker, said Friday it expected sales in China to rise by half as the country’s 10 percent growth rate drives demand for resources like coal and iron ore. Sales in the year starting April 1 are expected to rise by 40 to 50 percent from the current year, Kazuhiko Iwata, the president of the company’s mining division, said. Mining machinery sales account for about 30 percent of Komatsu’s construction equipment division revenue, which is forecast to be 1.3 trillion yen ($14 billion) this year.
http://www.nytimes.com/2010/03/13/business/global/13bizbriefs-INCREASEEXPE_BRF.html

Wednesday, March 3, 2010

It's the end of the road for Hummer

Detroit, Feb 25: With the collapse of the planned sale deal with a Chinese heavy equipment manufacturer, General Motors may be forced to wipe out the iconic American SUV Hummer.
As Chinese regulators rejected a 150 million dollar bid, Sichuan Tengzhong Heavy Industrial Machines Co on Wednesday, Feb 24 announced that it is pulling out of the deal.


This comes as a major blow to General Motors Co, which emerged from bankruptcy in Jul 2009.

GM is trying to wash its hands off all its unprofitable businesses so that it can focus on four core brands Chevrolet, Cadillac, Buick and GMC.

The company has been on a campaign to sell the Hummer since 2009 and signed a deal with the Chinese company in Oct 2009. The reluctant Chinese regulators have been setting up road blocks for the deal from the beginning.

"We are disappointed that the deal with Tengzhong could not be completed," said John Smith, GM vice president of corporate planning and alliances.

So, this is the end of the road for America's hulking Sports Utility Vehicle icon Hummer. However, the company will be honouring existing Hummer warranties.
  Read:  മലയാളതതില് 
"GM will now work closely with Hummer employees, dealers and suppliers to wind down the business in an orderly and responsible manner," Smith added.  http://news.oneindia.in/2010/02/25/general-motors-hummer-chinese-sale-deal-collapse.html

Tuesday, January 26, 2010

Heavy-duty cylinders behind steel forming machines

Heavy-duty hydraulic cylinders designed for working pressures up to 160 bar have been specified for three Trim-and-Curl machines built by Heinrich Georg for the Walsall Wheelbarrow Company
Parker Hannifin MMB heavy-duty hydraulic cylinders are specified for the control systems on three Trim-and-Curl machines built by special purpose machine manufacturers, Heinrich Georg Manufacturing, for the Walsall Wheelbarrow Company.
The Walsall Wheelbarrow Company is privately owned and operated by the Thacker family, now one of the UKs foremost wheelbarrow manufacturers and acknowledged as the originator of the wheelbarrow as we know it today.
New tooling, presses and the three Trim-and-Curl machines have been introduced as part of a £250,000 plant and machinery investment programme.
The company's engineers worked closely with designers from Heinrich Georg to produce the 'trim and curl' machines.
The machines produce pans for the company's new market leading professional wheelbarrow ranges - the 85 litre Valiant, the 95 litre Endurance and the 120 litre Invincible - for use in the construction, agricultural, horticultural and DIY market sectors.
These new wheelbarrows have a particularly low centre of balance, coupled with better weight distribution and an improved frame design.
"Our customers want quality, but they want it at the right price', commented Managing Director, Les Thacker.
"We have to make sure that we have the best manufacturing processes in the business.
Heinrich Georg has long been recognised as a premier OEM manufacturer of machines for the world's steel industries, which feature only the best engineered components and systems available.
The Trim-and-Curl machines can each produce up to 500 wheelbarrow pans a day.
The pans are produced from 0.8 mm to 1.2 mm steel in the three different depths.
Each machine features four Parker MMB heavy-duty hydraulic cylinders: to control the cutting heads which trim the pans to the correct size; and to control the forming heads which 'roll' the rim of the pan to eliminate the possibility of sharp edges.
Parker Hannifin MMB heavy-duty 'mill' cylinders are designed for working pressures up to 160 bar, in arduous applications such as steel mills where a rugged durable cylinder with a clean external design is required..
http://www.engineeringtalk.com/news/par/par169.html

Friday, December 25, 2009

Parliament approves loan for 13 heavy duty washing machines

 Parliament on Friday approved a 2.8 million Euro loan agreement between Ghana and the KBC Bank of Belgium for the supply and installation of heavy duty washing machines for 13 hospitals in the country.
    
The loan, which has a grace period of 10 years and repayment period of 20 years would among other things ensure the transportation, collection and processing of soiled linens in hospitals in a more decent manner.
    
The acquisition and installation of the washing machines would also reduce the risk of health workers who were hitherto exposed to infections such as hepatitis "A" since soiled linens were a major cause of infections in most hospitals.
    
Mr. James Klutse Avedzi, Chairman of the Parliamentary Select Committee on Finance who made this known gave the assurance that the loan would also step up the health delivery system by reversing the lack of automated laundry services in hospitals.
   
Other loans approved by Parliament included a 28 Million Euro loan facility between Ghana and Fortis Bank N.V of The Netherlands for the rehabilitation and upgrading of the Tamale Teaching Hospital and a $21.72 Million- Dollar loan from Export-Import Bank of India to finance improved fish harvesting and fish processing project as well as the supply of waste management equipment.
  
The rest are a $13.5 Million loan from the OPEC fund for International Development and Arab Bank for Economic Development in Africa for the upgrading and expansion of the radiotherapy and nuclear medicine services in Korle-Bu and Komfo Anokye Teaching Hospitals.
http://www.ghananewsagency.org/s_social/r_10360/

Friday, November 13, 2009

Sany Heavy Equipment gets going as Mingfa finally crosses the finish line

As the Chinese manufacturer of tunnelling machinery starts its roadshow, Mingfa mines new lows in terms of Chinese property IPO valuations.

Sany Heavy Equipment International, a Chinese manufacturer of coal mining equipment, on Monday launched an initial public offering that could raise up to HK$2.4 billion ($309 million). At the same time, Chinese property developer Mingfa Group has completed its prolonged IPO, raising $278 million.

Sany is selling 500 million shares, all primary, at a price between HK$4.10 and HK$4.80. This translates into 11.1 to 13 times 2010 projected earnings.

The company is China's leading manufacturer of roadheaders, which are machines used in mining to create tunnels. Its competitive edge is that it is able to manufacture roadheaders in China at a level of quality that allows it to compete with international players, but at a significantly lower price. It is also the first Chinese company to have branched out into making combined coal mining machinery, which incorporates mining, structural support and conveyance, into one automated unit.

The company is part of the Sany Group, a major supplier of equipment to civil engineering and construction firms in China. The other main company in the group is Sany Heavy Industry, a Shanghai-listed outfit that manufactures engineering machinery for construction use.

Coal mining equipment is a rapidly growing sector in China, partly because the increasing cost of coal has allowed miners to earn enough cash that can be used to splash out on better equipment. And there is a growing emphasis on quality, because a malfunctioning machine, even for just a day, can lead to large losses. Sany is already benefiting from these trends. In the first half of 2009, net profit was Rmb250 million ($37 million), 222% up on the same period last year.

There are already two cornerstones investors in the IPO: Government of Singapore Investment Corporation (GIC), Singapore's largest sovereign wealth fund, will take $25 million worth of shares; and GE Capital will invest another $12.5 million.

HSBC and Standard Chartered are joint bookrunners for the deal, which is expected to price on November 17.

As Sany's IPO gets going, another deal finally got done. Mingfa priced its IPO at HK$2.39 a share, at the middle of an indicative range that went from HK$2 to HK$2.89, raising $278 million.

This is well below the amount the company was looking for at the outset. Last month it launched the offering on terms that could have raised as much as $440 million. At the time, other developers were postponing their deals or pricing near the bottom. Although the deal could have been covered at the original range, according to a source, Mingfa decided to relaunch its IPO with a lower price range in order to give aftermarket trading a boost.

Institutional investors that had subscribed to the deal on the first set of terms were said to stay in at the lower price. They included a mix of long-only funds, hedge funds and property specialists. The retail tranche was approximately 80% covered.

The final price values the company at a discount of 68.2% versus its estimated 2010 net asset value (NAV), which sets a new valuation low among the recent flurry of IPOs by Chinese developers. To put this into perspective, another developer, Evergrande Real Estate raised $726.2 million at a 48.5% discount to NAV in a deal that was generally considered to be cheap. Meanwhile, Longfor Properties is looking for up to $916 million at a discount of between 30% and 39% to 2010 NAV in a deal that is due to price today, and Fantasia Holdings Group is trying to raise as much as $413 million at a discount of between 54.3% and 62.8%.

Bank of America Merrill Lynch, Bocom International and Deutsche Bank were joint bookrunners for Mingfa's IPO.
http://www.financeasia.com/article.aspx?CIaNID=116506

Friday, November 6, 2009

Mitsubishi Heavy 1H Grp Net Loss Y3.10B Vs Y29.03B Pft Yr Earlier

Mitsubishi Heavy Industries Ltd. (7011.TO)
Tokyo
1st Half Ended September 30
GROUP 2009 2008
Revenue Y1.32 tln Y1.57 tln
Operating Profit 25.11 bln 72.72 bln
Pretax Profit 2.65 bln 75.50 bln
Net Profit (3.10) bln 29.03 bln
Per share
Earnings (0.92) 8.65
Figures in parentheses are losses.
Results are based on Japanese accounting standards.




Mitsubishi Heavy Industries Ltd. also released the following forecasts:
GROUP Year Ending
Mar 2010
Revenue Y3.00 tln
Operating Profit 65.00 bln
Pretax Profit 20.00 bln
Net Profit 12.00 bln
Per share
Earnings 3.58
Results are based on Japanese accounting standards.






TOKYO (Dow Jones)--Mitsubishi Heavy Industries Ltd. (7011.TO) said Friday that it swung into the red in the first half as cautious corporate sentiment for increasing capital spending dented sales of its machinery products as the yen's appreciation reduced income from overseas markets.

The Tokyo-based heavy machinery maker posted a net loss of Y3.10 billion in the six months ended Sept. 30, a reversal from a net profit of Y29.03 billion in the same period a year earlier.

Sales fell 16% to Y1.322 trillion in the first half from Y1.575 trillion a year earlier.

For the current fiscal year through March, Mitsubishi Heavy left unchanged its forecast, projecting a net profit of Y12 billion on sales of Y3.000 trillion.

Mitsubishi Heavy reports its earnings under Japanese accounting standards.
http://online.wsj.com/article/BT-CO-20091030-700481.html